Sharmonia ST by Alex Koz
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 85% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 254.
Tone for oscillator 2 is manually set to 74.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 27.
Noise timbre
Noise level is manually set to 40.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 63.53Hz (64).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 18638.78Hz (252) and is modulated by Pressure, Note Num, Note Vel, LFO 1, LFO 2, VCF Env.
Pressure mod-matrix 1 modulation amount for low-pass filter cut-off frequency is 17.
LFO 1 mod-matrix 3 modulation amount for low-pass filter cut-off frequency is 9.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 6.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 112.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 255.
Note Num direct modulation amount for low-pass filter envelope amount is 116.
Filter resonance is statically set to 30% (76).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±25 cents (128).
Oscillators drift level is manually set to 41. Drift rate is 29
Oscillator 1 pitch pitch
Oscillator 1 pitch is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 1 pitch is 6.
Portamento pitch
Portamento time is manually set to 10.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 100. Effect 2 level is manually set to 100. Effect 3 level is manually set to 50. Effect 4 level is manually set to 150.
Delay & Reverb fx
not yet complete
4-Tap Delay fx
not yet complete
Delay & Reverb fx
not yet complete
Stereo Imaging fx
not yet complete
Pressure modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | 17 |
Note Num modulator
Controls VCF Keyboard Tracking, LFO 2 Rate, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 116 |
| matrix | LFO 2 Rate | 51 | |
| timbre | fader-indirect | VCF Cut-off Frequency | 6 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 112 |
| menu | VCF Envelope Velocity Sensitivity | 255 | |
| menu | VCA Envelope Velocity Sensitivity | 105 |
LFO 1 modulator
Controls OSC 1 Pitch, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 1 Pitch | 6 |
| timbre | matrix | VCF Cut-off Frequency | 9 |
| name | value |
|---|---|
| LFO 1 Rate | 1.87Hz (132) |
| LFO 1 Delay / Fade | 2.12s (82) |
| LFO 1 Shape | Sample & Glide |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 6 |
| name | value |
|---|---|
| LFO 2 Rate | 0.6Hz (93) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0.66s (96) |
| VCA Envelope Decay Time | 0.96s (116) |
| VCA Envelope Sustain Level | 91% (232) |
| VCA Envelope Release Time | 1.22s (134) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 125 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 88 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 112 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.49s (84) |
| VCF Envelope Decay Time | 0.63s (94) |
| VCF Envelope Sustain Level | 39% (100) |
| VCF Envelope Release Time | 0.2s (34) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 129 |
| VCF Envelope Decay Curve | 39 |
| VCF Envelope Sustain Curve | 54 |
| VCF Envelope Attack Curve | 0 |